SMARTBRO USB ZTE unit work in KahelOS

Kahel OS Forum » Kahel Editions » Kahel OS Desktop » Hardware and Devices

SMARTBRO USB ZTE unit work in KahelOS

(5 posts) (2 voices)

Started 4 months ago by fossyfrancis
Latest reply from fossyfrancis

Tags:

fossyfrancis
Member

Wish anybody can provide a guide on how to make SMARTBRO USB ZTE unit work in KahelOS upon inserting it to the USB port.

Replies will be highly appreciated.

Thanks!

Posted 4 months ago #
fplolz
Member

i assume you are using network manager? if yes , please follow the following instructions

Device Needed:
-Smartbro USB modem

Instructions:

1. Plug in the usb device. Once it appears on your desktop, right click the smartbro icon and select eject
2. The light will go out. Wait for a while until it goes back again. At this point, the usb is now switched from card reader to a modem.
3. Right click network manager and select Edit Connections
4. Select the Mobile Broadband tab and click the Add button
5. A window would appear and by default, the ZTE Incorporated ... is selected. Click Forward
6. Select Philippines as the provider's country and click Forward. A list of providers will be displayed. Choose Smart and click Forward
7. On the billing plan, click the drop down menu (the one which says Default) and select My Plan is Not Listed. A blank text box will appear.
Type smartbro as your access point name and click Forward then click Apply

A new window will appear. There are many textboxes here but you only need to modify a few.

8. Select the PPP Settings Tab and click the Configure Methods button
9. Uncheck all methods except PAP. Click Ok. Optionally you may also click Connect Automatically then finally click Apply.
10. After clicking apply, your modem will attempt to connect. You will notice that the green light from your modem will start to blink and a
message saying Established Connection or something similar will appear. Open your browser and test if you are now able to browse the web. If
not, give wait for about 30 sec and retry opening your browser again. If it still fails, remove your usb and repeat steps 1 & 2. If all fails, repeat
all the steps.

More Tips:

-When finished surfing, left click the network manager icon and click disconnect.
-When reconnecting, repeat step 1 & 2. And if you have checked Connect Automatically from step 8, your modem will automatically connect the
moment it switches into modem mode.

Posted 4 months ago #
fossyfrancis
Member

thanks fplolz!

However, nothing appears on my desktop whenever I insert my newly-purchased SmartBro USB modem. Though, its LED indicator blinked from red to blue.

Why is this so?

Posted 4 months ago #
fplolz
Member

hm.. there could be many reasons..
hm..could you run
dmesg
in your terminal ? the ouput might be useful ..
Thanks :)

hm..oh ya have ya tried the following instructions from 3) onwards ?

Posted 4 months ago #
fossyfrancis
Member

pci 0000:00:1b.0: reg 10: [mem 0xfc300000-0xfc303fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.1: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.2: reg 20: [io 0x18a0-0x18bf]
pci 0000:00:1d.7: reg 10: [mem 0xfc504400-0xfc5047ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0068 (mask 0007)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x1810-0x181f]
pci 0000:00:1f.2: reg 10: [io 0x1c00-0x1c07]
pci 0000:00:1f.2: reg 14: [io 0x18f4-0x18f7]
pci 0000:00:1f.2: reg 18: [io 0x18f8-0x18ff]
pci 0000:00:1f.2: reg 1c: [io 0x18f0-0x18f3]
pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ef]
pci 0000:00:1f.2: reg 24: [io 0x18d0-0x18df]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
pci 0000:00:1f.3: reg 20: [io 0x1c20-0x1c3f]
pci 0000:02:00.0: reg 10: [mem 0xf6000000-0xf600ffff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8000fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:0f:06.0: reg 10: [mem 0xfc204000-0xfc204fff]
pci 0000:0f:06.0: supports D1 D2
pci 0000:0f:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0f:06.0: PME# disabled
pci 0000:0f:06.1: reg 10: [mem 0xfc206000-0xfc2067ff]
pci 0000:0f:06.1: reg 14: [mem 0xfc200000-0xfc203fff]
pci 0000:0f:06.1: supports D1 D2
pci 0000:0f:06.1: PME# supported from D0 D1 D2 D3hot
pci 0000:0f:06.1: PME# disabled
pci 0000:0f:06.2: reg 10: [mem 0xfc205000-0xfc205fff]
pci 0000:0f:06.2: supports D1 D2
pci 0000:0f:06.2: PME# supported from D0 D1 D2 D3hot
pci 0000:0f:06.2: PME# disabled
pci 0000:0f:06.3: reg 10: [mem 0xfc206800-0xfc2068ff]
pci 0000:0f:06.3: supports D1 D2
pci 0000:0f:06.3: PME# supported from D0 D1 D2 D3hot
pci 0000:0f:06.3: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 0f-10] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff]
pci_bus 0000:10: [bus 10-13] partially hidden behind transparent bridge 0000:0f [bus 0f-10]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:08: [io 0x0800-0x080f] has been reserved
system 00:08: [io 0x1000-0x107f] has been reserved
system 00:08: [io 0x1180-0x11bf] has been reserved
system 00:08: [io 0xfe00] has been reserved
system 00:08: [mem 0xff800000-0xff800fff] has been reserved
pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0x84000000-0x840000ff]
pci 0000:00:1f.3: BAR 0: set to [mem 0x84000000-0x840000ff] (PCI address [0x84000000-0x840000ff]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf6000000-0xf7ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-05]
pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xf9ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-07]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfbffffff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf5ffffff 64bit pref]
pci 0000:0f:06.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:0f:06.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
pci 0000:0f:06.0: BAR 13: assigned [io 0x5000-0x50ff]
pci 0000:0f:06.0: BAR 14: assigned [io 0x5400-0x54ff]
pci 0000:0f:06.0: CardBus bridge to [bus 10-13]
pci 0000:0f:06.0: bridge window [io 0x5000-0x50ff]
pci 0000:0f:06.0: bridge window [io 0x5400-0x54ff]
pci 0000:0f:06.0: bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:0f:06.0: bridge window [mem 0x88000000-0x8bffffff]
pci 0000:00:1e.0: PCI bridge to [bus 0f-10]
pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1e.0: bridge window [mem 0xfc200000-0xfc2fffff]
pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:0f:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf7ffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfbffffff]
pci_bus 0000:06: resource 2 [mem 0xf4000000-0xf5ffffff 64bit pref]
pci_bus 0000:0f: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:0f: resource 1 [mem 0xfc200000-0xfc2fffff]
pci_bus 0000:0f: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:0f: resource 3 [io 0x0000-0xffff]
pci_bus 0000:0f: resource 4 [mem 0x00000000-0xffffffff]
pci_bus 0000:10: resource 0 [io 0x5000-0x50ff]
pci_bus 0000:10: resource 1 [io 0x5400-0x54ff]
pci_bus 0000:10: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:10: resource 3 [mem 0x88000000-0x8bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2425k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1271326293.749:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1710
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Checking image partition /dev/disk/by-uuid/f14fa38d-c0a6-406a-8fb5-e8c835359e8a
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 420k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 27 for MSI/MSI-X
[drm] set up 7M of stolen space
[drm] initialized overlay support
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:03: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Btrfs loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
ata4: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
ata1.00: ATAPI: Optiarc DVD RW AD-7560A, DX06, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7560A DX06 PQ: 0 ANSI: 5
ata4.00: link resume succeeded after 1 retries
ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-7: WDC WD800BEVS-22RST0, 04.01G04, max UDMA/133
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD800BEVS-22 04.0 PQ: 0 ANSI: 5
ata4.01: failed to resume link (SControl 0)
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link down (SStatus 0 SControl 0)
sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode
udev: starting version 151
ACPI: SSDT 7f6d19fa 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 7f6d1356 0061F (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: SSDT 7f6d1c74 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 7f6d1975 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
Switching to clocksource hpet
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (40 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (42 C)
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
tifm_7xx1 0000:0f:06.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
iTCO_vendor_support: vendor-support=0
ACPI: WMI: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input6
ACPI: AC Adapter [ADP1] (off-line)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI region SMBI [0x1c20-0x1c2f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
tg3.c:v3.106 (January 12, 2010)
tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
tg3 0000:02:00.0: setting latency timer to 64
firewire_ohci 0000:0f:06.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfc504000
eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:16:d3:e4:d1:64
eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
cfg80211: Calling CRDA to update world regulatory domain
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504400
uhci_hcd: USB Universal Host Controller Interface driver
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
firewire_ohci: Added fw-ohci device 0000:0f:06.1, OHCI version 1.10
acer-wmi: Acer Laptop ACPI-WMI Extras
acer-wmi: Brightness must be controlled by generic video driver
ACPI: Battery Slot [BAT0] (battery present)
yenta_cardbus 0000:0f:06.0: CardBus bridge found [1025:011c]
yenta_cardbus 0000:0f:06.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:0f:06.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:0f:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
rtc_cmos 00:09: RTC can wake from S4
rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
NET: Registered protocol family 23
yenta_cardbus 0000:0f:06.0: ISA IRQ mask 0x0cf8, PCI irq 22
yenta_cardbus 0000:0f:06.0: Socket status: 30000006
pci_bus 0000:0f: Raising subordinate bus# of parent bus (#0f) from #10 to #13
yenta_cardbus 0000:0f:06.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
yenta_cardbus 0000:0f:06.0: pcmcia: parent PCI bridge Memory window: 0xfc200000 - 0xfc2fffff
yenta_cardbus 0000:0f:06.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
sdhci-pci 0000:0f:06.3: SDHCI controller found [104c:803c] (rev 0)
sdhci-pci 0000:0f:06.3: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0f:06.3] using PIO
firewire_core: created device fw0: GUID 000ae4073360975e, S400
nsc-ircc 00:0a: activated
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Found dongle: Supports SIR Mode only
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.33-ARCH-ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:04:00.0: setting latency timer to 64
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
iwl3945 0000:04:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:04:00.0: irq 29 for MSI/MSI-X
hda_codec: ALC268: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
phy0: Selected rate control algorithm 'iwl-3945-rs'
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
fuse init (API version 7.13)
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
EXT4-fs (sda4): mounted filesystem with ordered data mode
Adding 4144760k swap on /dev/sda2. Priority:-1 extents:1 across:4144760k
usb 6-2: new low speed USB device using uhci_hcd and address 2
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input9
a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.1-2/input0
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
tg3 0000:02:00.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwl3945 0000:04:00.0: firmware: requesting iwlwifi-3945-2.ucode
Bridge firewalling registered
iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
wlan0: direct probe to AP 00:22:6b:53:be:d8 (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:22:6b:53:be:d8 (try 1)
wlan0: authenticated
wlan0: associate with AP 00:22:6b:53:be:d8 (try 1)
wlan0: RX AssocResp from 00:22:6b:53:be:d8 (capab=0x411 status=0 aid=6)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
CE: hpet increasing min_delta_ns to 15000 nsec
CE: hpet increasing min_delta_ns to 22500 nsec
14:05 fossyfrancis ~ $

Posted 3 months ago #

RSS feed for this topic

Reply

You must log in to post.